DREAMERS ART EXCLUSIVE Waterslide decals LARGE (4 Set bundle)
Introducing the waterslide nail decals from the collaboration between The Cox Studio and Helanartist, Onimochii and Sademursu.
This collection features distinctive designs that bring a fresh and creative touch to your nail art. Elevate your manicure with these exclusive decals designed for a unique and stylish look.
Sademursu Style 1
Helana Style 3
Onimochii Style 2 and 4
This bundle includes 4 sets (2 sets of each style)
Instructions for Applying Waterslide Nail Decals
Materials Needed:
- Waterslide nail decals
- Small bowl of water
- Tweezers
- Scissors
- Clear base coat (normal or UV gel)
- Clear top coat (normal or UV gel)
- Silicone stamper
- UV/LED lamp (if using UV gel)
- Paper towel or tissue
- Gloves
- Nail file and buffer
Steps:
1. Wear Gloves:
- Put on gloves to protect your skin from chemicals and to prevent oils or dirt from transferring to the nails or decals during application.
2. Prepare Your Nails:
- Start with clean, dry nails. Remove any old polish and ensure your nails are free of oils and debris.
- Apply a clear base coat to your nails. You can use either a normal base coat or a UV gel base coat. If using UV gel, cure under a UV/LED lamp according to the manufacturer's instructions. Ensure the base coat is sticky or tacky for better decal adhesion.
3. Cut Out the Decal:
- Carefully cut out the desired decal from the sheet using scissors. Trim as close to the design as possible to minimize excess film.
4. Soak the Decal:
- Place the cut-out decal into a small bowl of water with the design side facing up. The decal should float on the surface. Let it soak for about 10-20 seconds or until the backing paper begins to slide off. Avoid getting water on the actual image to prevent damage.
5. Prepare the Decal for Application:
- Using tweezers, carefully pick up the decal and place it face up onto a paper towel. Allow the backing paper to dry for a few seconds.
6. Transfer the Decal:
- Place the decal face down onto the silicone stamper. Gently slide the backing paper off while ensuring the decal remains smooth and flat on the stamper.
7. Apply the Decal:
- Press the silicone stamper with the decal onto your nail, transferring the decal from the stamper to your nail.
8. Let It Set:
- After pressing the decal onto your nail, let it sit undisturbed for a minute. Handling the decal while it’s still wet can cause it to shift or become damaged.
9. Smooth the Decal:
- Once the decal has set for a minute, gently smooth it with your finger to ensure it adheres properly and any wrinkles are eliminated.
10. Apply Base Coat and Buffer:
- Apply a clear base coat over the entire nail to seal and smooth the decal. If using a normal base coat, let it dry completely. If using UV gel, cure it under a UV/LED lamp according to the manufacturer's instructions.
- Use a nail buffer to gently smooth the surface of the decal, blending it seamlessly with your natural nail.
11. Apply Top Coat:
- Apply a clear top coat over the entire nail to protect the decal and add shine. If using a normal top coat, let it dry completely. If using UV gel, cure it under a UV/LED lamp according to the manufacturer's instructions.
Pro Tips:
- Work on one nail at a time to prevent the decals from drying out before application.
- Ensure your base coat and top coat are completely dry before moving to the next step for a smooth application.
- Never wet the actual image to avoid damage.
- If you’re new to waterslide decals, practice with my logos first to avoid wasting decals.
Enjoy your beautifully decorated nails with waterslide decals!
Please see video of application: Waterslide nail decals